I usually love the holidays and I enjoyed them very much this year being close to family. However, I also realized that I'm really glad they are over. I want to get back to "normal." As it's the New Year, I am considering any resolutions/goals/etc. I'm thinking after such a year of change as 2014 was, I think I will just enjoy 2015 and whatever comes along. In other words, I'm tired of planning the future!
One day last week while I was home alone, I tackled one of the last remaining projects needed in my new sewing room: a design wall. My normal answer is to wrap cardboard with batting and tack it up on the wall, however, this room is short on wall space, so I had to come up with a different solution. Luckily, I enjoy scouring Pinterest for any and all ideas for sewing rooms, so I had an option in mind, and it is looking great so far.
The solution I came up with involves the closet doors. They are quite nice, but really a bit of a wasted space. My first idea was to upholster them. I tested out taping some of the thin sheets of crafting foam core to the the doors, and they still opened and closed. I thought I could apply the foam core and then add flannel on top. But I just couldn't do it. I felt like I might somehow damage the doors. My husband said, "Who cares? We OWN this house." I must admit that that is still a bit of a strange notion to me--but I still didn't want to damage anything. I decided to try more of a non-permanet solution first.
I'm afraid I can't quote a blog specifically, as I've seen this idea in a few places. I purchased two sheets of foam insulation at a Home Improvement store. They are 4 feet by 8 feet. I was able to track down a brand that has tongue and grooves. This way, two (or more) sheets can be hooked together.
Here is one sheet leaning against the trash cans in our garage. Can you see the groove in the end?
I had my husband measure the closet doors inside the casing and he trimmed the two sheets so that when hooked together, they would fit inside the casing. This means that while I'm using my design wall, I can't access my closet, but as it is mostly storing things I seldom use/need, (such as my few UFOs! ha ha) it shouldn't be a problem.
Once the pieces were trimmed (I think he used a utility knife--the panels are just a dense styrofoam-like material) I used spray adhesive to attach flannel.
I decided to use flannel instead of batting on these as I thought that flannel would be more sturdy and hold up better than batting since the completed panels will be portable. Normally, I would wrap the flannel around the sides and attach to the back, but I needed to allow for the tongue and groove,
First I ironed the flannel nice and flat, and then along one selvage, I used fusible tape to create a hem.
I placed this finished edge along the tongue on one sheet of insulation, and the groove of the other, so that when attached, there wouldn't be a raggedy selvage showing.
I hate using spray adhesive! It gets everywhere and the overspray is no fun to clean up, so I took the foam sheets one at a time outside and did the spraying there. (I made these from start to finish one at a time.) I also worked on this project in the garage on a piece of plywood placed on top of sawhorses for a nice, big work surface. (I didn't relish the idea of crawling all over the floor to do this, but it is an option if you need it.)
In this picture, you can see the white flannel finished hem running along the tongue edge of the foam board.
Once that hemmed edge was aligned along the foam board, I could continue to smooth, smooth, smooth the flannel onto the rest of it. I had almost 6 inches of excess fabric on the other selvage side and an inch or two extra on the top and the bottom. A good tip is to make sure that your spray adhesive has the ability to move things around for a bit. Don't get one that immediately adheres anything that touches it! I did have to peel the flannel back in a few places to get all the wrinkles out.
Once it was all nice and smooth, I gave it a few minutes to adhere nicely.
Next I flipped everything over.
I used duck tape to adhere the edges of the flannel to the back of the foam sheet, folding the excess at the corners. It isn't very pretty, but no one is going to see the back, and if so, who cares?
It took around 2 hours, or a bit less, to do all of the pressing, spraying, and taping for both panels.
Once finished and hooked together (via the tonge and groove) the two panels tuck perfectly into the casing of the closet. When I need to get inside, I can just move the panels out of the way, or I can take the two panels apart and store them behind the door into the room. You can see the thicker "hems" running down the middle where the two pieces come together.
And here it is in use, with some quilt blocks all arranged on it.
Meanwhile, I'm still getting all of my fabric wrapped around the comic book inserts and shelved. I also have one more project to make for the room--a fabric-covered bulletin/inspiration board. My holdup on that project is deciding what fabric to use! After that, I will be able to share the entire room with you!
Have a great day!
JoAnne
